Series 7132 is a flexible, lightweight liquefied petroleum gas (LPG)/propane delivery and transfer hose. The hose meets all Underwriters Laboratories (UL21) and Canadian Gas Association (CGA Type I) requirements. The construction incorporates multiple textile plies of reinforcement for flexibility and kink resistance. The perforated cover is resistant to mild chemicals, oil and ozone. Series 7132 is available in long lengths on reels, long cut lengths and factory-tested assemblies from stock in popular configurations.

Series 7132 and Natural Gas:The molecules of natural gas are small, enhancing their ability to permeate through standard rubber hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas accumulates with potentially dangerous consequences. Series 7132 may be used for natural gas service, but ONLY under ALL of the following conditions:

• The application must be in a well-ventilated environment: Outdoors, or indoors with significant continuous air movement.

• Series 7132 is not to replace fixed/rigid pipe where that material is more appropriate due to reduced permeation and overall strength and durability. Use rigid pipe, non-permeable tubing or hose with barrier constructions to convey natural gas whenever possible.

Series 7132 and Compressed Natural Gas (CNG):Series 7132 is not for use in any CNG application, including fuel dispensing, on-board vehicle fuel lines, or fuel transfer.

Series 7132 and Anhydrous Ammonia (NH3):Series 7132 is not for use with anhydrous ammonia.

Tube:

Black nitrile

Reinforcement:

Multiple textile plies

Cover:

Black chloroprene; perforated smooth finish

Temp.Range:

-40°F to +180°F (-40°C to +82°C) (The hose construction is capable of this rating, but LP Gas should NEVER be conveyed over 140°F/60°C

Brand Method:

Impression

Brand Example:

PARKER SERIES 7132 (ID) CSA® CAN 1-8.1 CGA TYPE I CAUTION - LP GAS HOSE MH6737 C U ® US ISSUE NO. XXXXXX 350 PSI MAX WP

Design Factor

5:1

Industry Standards:

UL21; CAN/CGA-8.1-M86 Type I; optional DOT factory hose assembly testing and marking also available for sizes smaller than 3/4".

Applications:

LP gas/propane
Cookers, grills, heaters, weed burners; delivery, transfer
Agriculture, commercial and residential heating, construction, general industrial

Vacuum:

Not recommended

Compare to:

Boston Blackline (LPG); Gates LP350; Thermoid Type 75

Codigo
Ch&J

ID
(in)

ID
(mm)

Reinf
Plies

OD
(in)

OD
(mm)

Approx
Wt
(lbs/ft)

Approx
Wt
(kg/ft)

Min
Bend
Rad
(in)

Min
Bend
Rad
(mm)

Max
Rec
WP
(psi)

Max
Rec
WP
(bar)

Perm
Cplg
Rec
*

Std
Pack
Qty
(ft)

Stock
Status
**

7132-38354E

3/8

9.5

4

0.760

19.1

0.22

0.10

3.5

88.9

350

24.1

HY

300

Y

7132-50354

1/2

12.7

4

0.937

23.8

0.32

0.15

4.5

114.3

350

24.1

7661

500

Y

7132-75354

3/4

19.1

4

1.250

31.8

0.50

0.23

6.5

165.1

350

24.1

HY

350

Y

7132-100354

1

25.4

4

1.500

38.1

0.63

0.29

7.5

190.5

350

24.1

7661

300

Y

⚠WARNINGS!

Do not use with male swivel couplings or other couplings containing o-rings, which may dry out, crack and fail over time.