T240A Hose

ASSEMBLY INSTRUCTIONS FOR:

1200 SERIES BITELOK TWO-PIECE
EXTERNAL SKIVE COUPLINGS.
USE ONLY RYCO T240A HOSE.

Follow same steps as page 408, except for 1200
Series Couplings with T240A hose, Step 2 is as shown
on right.

RYCO Crimp Chart detailing External Skive
Length and Crimp Diameter is available from
RYCO Hydraulics.

STEP TWO

Mark skive length. (Refer to “RYCO Crimp Chart”).
Cut rubber cover around down to wire reinforcement
then slit lengthwise. Raise flap and pull off with pliers.